DIN 6340

Washers for clamping devices

English 1987
0.000
DIN
Detailed Information

Washers for clamping devices as specified in DIN 6340 are designed to be used for clamps as specified in DIN 6314, DIN 6315 and DIN 6316. Their dimensions have thus been harmonized with the specifications given in those standards.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 966
1971
English

Cross Recessed Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Normally these screws are made in the sizes for which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according to DIN 6900. Recesses and recess penetration gauges according to DIN 7962.
ASTM
ASTM A490M
1993
English

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Joints […]
DIN
DIN 555
1972
English

Hexagon Nuts Metric Thread Type g

Tho dimensions of the hexagon nuts according to this Standard correspond with those indicated in the ISO Recommendation ISO/R 272-1968 published by the International Organization for Standardization (ISO).
IFI
IFI-156
2002
English

THUMB SCREWS AND WING SCREWS

This standard establishes the dimensional data for two types of thumb screws included in a regular and heavy series. Also included are wing screws in four types and two styles. Plain, cup, cone, oval, flat and dog points are also included.
ASTM
Abstract of ASTM A153/A153M
2000
English

ZINC COATING (HOT-DIP) ON IRON AND STEEL HARDWARE

1.1 This specification covers zinc coatings applied by the hot-dip process on iron and steel hardware. 1.2 This document is intended to be applicable to hardware items that are centrifuged or otherwise handled to remove excess galvanizing bath metal (free zinc). Coating thickness grade re […]
DIN
DIN 929
1987
English

Hexagon weld nuts

This standard specifies requirements for M 3 to M 16 hexagon weld nuts assigned to product grade A.