DIN 675

Flat countersunk head rivets with nominal diameters from 3 to 5 mm

English 1993
0.000
DIN
Detailed Information

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal flat countersunk head rivets with nominal diameters from 3 to 5 mm.

Download File
(Log in to download spec.)

Check out other specifications

DIN
Beiblatt 1 zu DIN 267 Teil 2
1984
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Ausführung und Maßgenauigkeit – Beispiele für Toleranzangaben

In den nachfolgenden Bildtafeln sind - nach den Produktklassen A, B und C (bisher Ausführungen m, mg und g) geordnet - die aus DIN ISO 4759 Teil 1 und den bisherigen Festlegungen in DIN 267 Teil 2, Ausgabe April 1968, entnommenen Maßtoleranzen den verschiedenen DIN-Normen über Schrauben u […]
ASTM
ASTM F835
2004
English

ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 thread sizes and flat countersunk (SFHCS) 0.060 through 1.5 thread sizes head cap screws having material properties for high-strength requirements. 1.2 F […]
JIS
JIS B 0209-1
2001
English

ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data

This Standard specifies the tolerance system for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2. The tolerance system refers to the basic profile in accordance with JIS B 0205-1.
ASTM
ASTM F1941M
2005
English

Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

1.1 This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with metric screw threads. It specifies coating thickness, supplementary chromate finishes, corrosion resistance, precautions for managing the risk of hy […]
ASTM
Abstract of ASTM B766
1998
English

ELECTRODEPOSITED COATINGS OF CADMIUM

1.1 This specification covers the requirements for electrode posited cadmium coatings on products of iron, steel, and other metals. NOTE 1 - Cadmium is deposited as a coating principally on iron and steel products. It can also be electrodeposited on aluminum, brass, beryllium copper, copp […]
JIS
JIS B 1058
1995
English

Mechanical properties of fasteners Part 7 : Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This Standard specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordance with ISO 898-1. The test applies to bolts and screws with thread less than M3 for which no breakin […]