Check out other specifications
1992
English
Hexagon thin nuts with metric fine pitch thread – Product grades A and B (ISO 8675 :1988) English version of DIN EN 28675
This International Standard gives specifications for hexagon thin nuts, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 64 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.
2002
English
STRUCTURAL BOLTS, ALLOY STEEL, HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH
1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi. 1.2 These bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification […]
1986
English
Slotted countersunk (flat) head wood screws
The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g hes been replaced by product grade C. c) The content of the […]
2000
English
COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL
1.1 This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and including 107 um (0.0042 in.). The seven thickest classes are usually referred to as "mechanically galvanized."
1967
English
Stressed-type Fastenings with Taper Action – Taper Keys – Keyways – Dimensions and Application
For the time being no permissible variations have been laid down for the taper on the key and in the hub keyway. If special conditions make necessary the observance of certain permissible variations these must be agreed at the time of ordering. The dimension h is the maximum height of the […]