DIN 6883

Taper Key Torque Transmission – Parallel Keys – Dimensions and Application

English 1956
0.000
DIN
Detailed Information

No figures for permissible variations of tapers on keys and in hub keyways have so far been laid down. If, in special cases, certain prescribed permissible variations must be observed, these must be agreed with the manufacturer when ordering.

Download File
(Log in to download spec.)

Check out other specifications

SAE
SAE J429
2011
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

This SAE standard covers the mechanical and material requirements for inch-series steel bolts, screws. studs. screws for sems, and U-bolts used in automotive and related industries in sizes to [...]
DIN
DIN 76-1
2004
English

Thread run-outs and thread undercuts for ISO metric threads as in DIN 13-1

This standard specifies dimensions for thread run-outs and thread undercuts for bolts, screws and similar components with external or internal ISO metric (coarse or fine pitch) thread as in DIN [...]
DIN
DIN 479
1985
English

Square head bolts with short dog point

This standard specifies product grade A square head bolts with short dog point and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from thos [...]
DIN
DIN 7341
1977
English

Rivet Pins

St = 9 SMnPb 28K according to DIN 1651 or St 50 K + G according to DIN 1652 at manufacturer's choice; if a specific material is required, this is to be agreed.
DIN
DIN 553
1986
English

Slotted set screws with cone point (modified version of ISO 7434, 1983 edition )

This standard specifies the characteristics of M 1 to M 12 slotted set screws with cone point, assigned to product grade A. Where, for special purposes, the screws are to meet requirements diff [...]
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
DIN EN
DIN EN 28736
1992
English

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
DIN
DIN 6797
1988
English

Toothed lock washers

The main purpose of toothed lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washers [...]
NASM
NASM 51958
1999
English

SCREW, MACHINE PAN-HEAD, CROSS-RECESSED, CORROSION RESISTING STEEL, UNF-2A

MATERIAL: STEEL, CORROSION-RESISTING, 300 SERIES AS SPECIFIED IN QQ-S-763 AND FED-STD-66, COMPOSITION 304 OR 316 OR EQUAL TO OR INTERCHANGEABLE WITH 16:18 OR 18:8 CHROMIUM-NICKEL ALLOY STEEL