DIN 6900-2

Screw and washer assemblies – Coarse threaded screws with captive wave spring washer

English 1990
0.000
DIN
Detailed Information

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive wave spring washer (and also an optional plain washer). Wave spring washers are intended to counteract loosening of bolted connections (e.g. as a result of setting) (cf. DIN 267 Part 26). They do not effectively prevent loosening of the connection under varying radial load and are thus designed for use with short screws predominantly subject to thrust.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1046
2005
English

Fasteners — Non-electrolytically applied zinc flake coatings

This Standard specifies requirements for thickness, corrosion resistance and mechanical and physical properties of non-electrolytically applied zinc flake coatings on steel fasteners with m […]
DIN
DIN 13-13
1983
English

ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes

This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maxim […]
ASME ANSI
ASME/ANSI B18.18.4M
1987
English

INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection […]
DIN
DIN 661
1993
English

Countersunk head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal countersunk head rivets with nominal diameters from 1 to 8 mm.
ANSI
ANSI B18.2.4.2M
1995
English

METRIC HEX NUTS, STYLE 2

1.1 This standard covers the complete general and dimensional data for metric hex nuts, Style 2, recognized as American National Standard. 1.2 The inclusion of dimensional data in this stan […]
ISO
ISO 262
1973
English

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

This International Standard specifies ISO general purpose metric screw threads for screws, bolts and nuts in the diameter range 1 to 39 mm. These selected sizes are recommended also for ge […]
DIN EN
DIN EN 28735
1992
English

Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735

This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 […]
DIN
DIN 6378
1974
English

Clip Bolts

Clip bolts according to DIN 6378 are clamping components which are used in the manufacture of workpieces. They form part of fixtures which are in immediate contact with workpieces for machi […]
DIN EN
DIN EN 28749
1992
English

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.