Check out other specifications
1983
English
Hexagon nuts with flange
This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property cla […]
1990
English
METRIC HEX JAM NUTS
1.1 This standard covers the complete general and dimensional data for metric hex jam nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described […]
2001
English
Hexalobular internal driving feature for bolts and screws
This Standard specifies the shape and basic dimensions of hexalobular internal driving feature for bolts and screws including the gauging method. The curvature of the contour of the hexalobular internal driving feature is defined by the gauges specified in Tables 3, 4 and 5. Additional i […]
2000
English
Mechanical properties of fasteners made of carbon steel and alloy steel— Part 1 : Bolts, screws and studs
This Standard specifies the mechanical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Products conforming to the requirements of this Standard are evaluated only in the ambient temperature range an […]
1995
English
STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS [METRIC]
1.1 These test methods establish procedures for conducting tests to determine the mechanical properties of metric externally and internally threaded fasteners, washers, and rivets. 1.2 Property requirements and the applicable tests for their determination are specified in individual produ […]
2006
English
Steels for quenching and tempering – Part 2: Technical delivery conditions for non alloy steels – English version of DIN EN 10083-2:2006-10
This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for: — semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1), — bars (see NOTE 2 in EN 10083-1:2006, Clause 1), — rod, — wide flats, — hot […]