DIN 6902

Plain washers for screw and washer assemblies

English 1990
0.000
DIN
Detailed Information

Washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Parts 1 to 3.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7982
1984
English

Cross recessed countersunk head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply […]
ISO
ISO 1478
1983
English

Tapping screws thread

This International Standard specifies the thread and thread ends for tapping screws (sheet metal screws) with thread sizes from ST 1,5 to ST 9,5 inclusive.
ISO
ISO 13918
2008
English

Welding — Studs and ceramic ferrules for arc stud welding

This International Standard specifies: ⎯ requirements for studs and ceramic ferrules for arc stud welding; ⎯ dimensions, materials, mechanical properties and, when required, conditions of e […]
ASTM
ASTM A29/A29M
2012
English

Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel […]
DIN
DIN 922
1986
English

Slotted pan head screws with small head and full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1.8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
DIN EN
DIN EN 28673
1992
English

Hexagon nuts, style 1, with metric fine pitch thread – Product grades A and B (ISO 8673 : 1988) English version of DIN EN 28 673

This International Standard gives specifications for hexagon nuts, style 1, with metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 64 mm, with product g […]
JIS
JIS B 1081
1997
English

Threaded fasteners— Axial load fatigue testing— Test methods and evaluation of results

This Japanese Industrial Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Un […]
DIN
DIN 6912
1985
English

Hexagon socket thin head cap screws with pilot recess for wrench key

This standard specifies product grade A hexagon socket thin head cap screws with pilot recess for wrench key with ISO metric screw thread from M4 up to and including M36. If, in special ca […]
ANSI ASME
Abstract of ANSI/ASME B1.2
2001
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for th […]