DIN 6903

Plain washers for tapping screw and washer assemblies

English 1990
0.000
DIN
Detailed Information

Washers as specified in this standard are intended for use with DIN 6901 tapping screw and washer assemblies.

Download File
(Log in to download spec.)

Check out other specifications

Custom
General Motors | GM6174M
2001
English

Corrosion Protective Coatings Phosphate/Organic/Oil Type

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, organic [...]
DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 [...]
DIN
DIN 705
1955
English

Bright Set Collars, Locked by Grub Screws or by Pins, Light Pattern Series

Set collars to Type A are furnished with grub screw to DIN 553.
DIN
DIN 962
1990
English

Designation system for fasteners

This standard specifies a system of designation for bolts, screws, studs and nuts (‘fasteners’, for short), and also gives supplementary order designations for special features and finishes of [...]
DIN
DIN 7500-1
2000
English

ISO metric thread rolling screws Part 1: Types, designation and requirements

This standard specifies dimensions, the designation and requirements for design and dimensional accuracy of ISO metric thread rolling screws. For further dimensions, tolerances, materials, mech [...]
BS EN
BS EN 10027-1
2016
English

Designation systems for steels Part 1: Steel names

This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, [...]
DIN
DIN 6340
1987
English

Washers for clamping devices

Washers for clamping devices as specified in DIN 6340 are designed to be used for clamps as specified in DIN 6314, DIN 6315 and DIN 6316. Their dimensions have thus been harmonized with the spe [...]
DIN
DIN 6907
1990
English

Serrated lock washers with external teeth for screw and washer assemblies

Serrated lock washers as specified in this standard are intended tor use with screw and washer assemblies as specified in DIN 6900 Part 4. Serrated lock washers are mainly designed to provide e [...]
DIN
DIN 137
1994
English

Wave spring washers

Spring lock washers as covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of a property class less than 5.8, as specified in [...]