DIN 6904

Curved spring washers for screw and washer assemblies

English 1990
0.000
DIN
Detailed Information

Curved spring washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 2. They are designed for use with bolted connections with bolts of a property class below 5.8 (as specified in ISO 898 Part 1). Curved spring washers are intended to counteract loosening of such connections (e g. as a result of setting) (cf.DIN 267 Part 26). They do not effectively prevent loosening of the connection under varying radial load and are thus designed for use with short screws predominantly subject to thrust.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 35649
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UN [...]
ASTM
ASTM D2000
2001
English

Standard Classification System for Rubber Products in Automotive Applications

1.1 This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but [...]
Custom
John Deere | JDM F25
2022
English

Specification for Zinc Flake Coatings for Bolted Joints

1.1 JDM F25 specifies requirements for black color appearance, hexavalent chromium-free zinc flake coatings with a 0.09-0.16 coefficient of friction (CoF) requirement. Two levels of corrosion r [...]
DIN EN
DIN EN 1665
1998
English

Hexagon bolts with flange – Heavy series – English version of DIN EN 1665

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
DIN EN
DIN EN 10263-2
2002
English

Steel rod, bars and wire for cold heading and cold extrusion Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working – English version of DIN EN 10263-2

This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without [...]
DIN
DIN 124
1993
English

Steel round head rivets with nominal diameters from 10 to 36 mm

This standard specifies dimensions of steel round head rivets with nominal diameters from 10 to 36 mm.
NASM
NASM 16995
1998
English

SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A

The minimum tensile strength in load pounds, indicated for each size in Table I, is based on 80.000 PSI minimum tensile strength. Load pounds are calculated by the stress areas indicated in FED [...]
ISO
ISO 2901
1977
English

ISO metric trapezoidal screw threads – Basic profile and maximum material profiles

This International Standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads.
JIS
JIS B 1053
1999
English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5 : Set screws and similar threaded fasteners not under tensile stresses

This Standard specifies the mechanical properties of set screws and similar threaded fasteners not under tensile stresses with nominal thread diameters from 1.6 mm up to and including 24 mm, wh [...]