DIN 6914

High-strength hexagon head bolts with large widths across flats for structural steel bolting

English 1989
0.000
DIN
Detailed Information

High-strength hexagon head bolts are intended for use in GV and SL structural steel bolting in accordance with DIN 18800 Part 1, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7415
1984
English

Plain washers for high-strength structural bolting, hardened and tempered

This International Standard specifies those hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts of diameters from M12 [...]
DIN
DIN 797
1970
English

Special Foundation Bolts

Strength category (material): 3.6 according to DIN 267 Part 3 Other strength categories or materials by agreement
ASME
ASME B18.7
2007
English

GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS

This Standard covers complete general and dimensional data for semi-tubular rivets, full tubular rivets, split rivets, and rivet caps for use in general purpose applications. The products descr [...]
JIS
JIS B 1112
1995
English

Cross-recessed head wood screws

This Japanese Industrial Standard specifies the cross-recessed head wood screws (Hereafter, referred to as "wood screws".) made of steel wire, stainless steel and brass for general use.
DIN
DIN 6884
1956
English

Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application

No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]
ISO
ISO 1580
1983
English

Slotted pan head screws – Product grade A

This International Standard specifies the characteristics of slotted pan head screws in product grade A and with thread sizes M 1.6 to M 10 inclusive.
IFI
IFI-115
2007
English

FLANGE 12-POINT SCREWS

IFI-115 is a standard developed through the procedures of Industrial Fasteners Institute. IFI-115 was first published in 1970 and modestly revised and reissued in 1986 and 2002.
ISO
ISO 7051
1983
English

Cross recessed raised countersunk (oval) head tapping screws

This International Standard specifies the characteristics of cross recessed raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
BS EN ISO
BS EN ISO 15330
1999
English

Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

This International Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric b [...]