DIN 6916

Round washers for high-strength structural steel bolting

English 1989
0.000
DIN
Detailed Information

The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with
DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 80705
1990
English

Thin nuts with coarse pitch and fine pitch thread and with small widths across flats

This standard specifies requirements for thin nuts with small widths across flats and ISO metric screw thread as specified in the DIN 13 series, assigned to product grades B and C. If, in speci [...]
DIN EN
DIN EN 28765
1992
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
ASTM
Abstract of ASTM F880M
1990
English

STAINLESS STEEL SOCKET SET SCREWS [METRIC]

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SSS), sizes M1.6 through M24, having Property Classes A1·50 and A1·70. NOTE 1 - This speci [...]
ISO
ISO 3506-1
2009
English

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when test [...]
DIN
DIN 78
2001
English

Bolt end protrusions

This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13 [...]
ISO
ISO 4755
1983
English

Fasteners – Thread undercuts for external metric ISO threads

This International Standard lays down the form and dimensions of thread undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where an undercu [...]
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
DIN
DIN 267-10
1988
English

Fasteners – Technical delivery conditions – Hot-dip galvanized parts

Th s standard specifies the technical delivery conditions for fasteners (mainly screws. bolts and nuts) with an M 6 to M 36 coarse thread and provided with a zinc coating applied by hot-dip gal [...]
DIN EN
DIN EN 28736
1992
English

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.