DIN 6924

Prevailing torque type hexagon nuts with nonmetallic insert

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M3 to M48 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A (for sizes up to M16) and product grade B (for sizes over M16).

If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding materials other than those specified in DIN 267 Part 15, performance at temperatures above +120°C, or corrosion resistance, this shall be agreed upon at the time of ordering (cf. ‘Field of application’ clause in DIN 267 Part 15).

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F468M
1997
English

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws. and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of alloys in common use and intended for general service applications. 1.2 Unless otherwise specifie […]
ASTM
ASTM F912
2004
English

ALLOY STEEL SOCKET SET SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-set screws (SSS) 0.060 through 2.000-in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws are intended for compression applications only and are not customarily subjected to embrittlemen […]
ASTM
Abstract of ASTM B633
1998
English

ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL

1.1 This specification covers requirements for electrodeposited zinc coatings applied to iron or steel articles to protect them from corrosion. It does not cover electrodeposited zinc coated steel wire or sheets (see ASTM A591/A591 M for sheets). 1.2 The coatings are provided in four stan […]
ASTM
Abstract of ASTM B766
1998
English

ELECTRODEPOSITED COATINGS OF CADMIUM

1.1 This specification covers the requirements for electrode posited cadmium coatings on products of iron, steel, and other metals. NOTE 1 - Cadmium is deposited as a coating principally on iron and steel products. It can also be electrodeposited on aluminum, brass, beryllium copper, copp […]
DIN
DIN 918
1979
English

Fasteners – Terminology – Spelling of terms – Abbreviations

This standard applies to fasteners as described in clause 2 and specifies terms for them, terms for the most important characteristics of the parts and their abbreviations. When specifying descriptors in product standards, spelling according to precedence of the characteristics is obligatory.
ASME ANSI
Abstract of ASME/ANSI B1.12
1998
English

CLASS 5 INTERFERENCE-FIT THREAD

This standard provides dimensional tables for external and internal plastic flow interference-fit (Class 5) threads of modified National thread form in the coarse thread series (NC) in sizes 0.250 in. through 1.500 in. This is not the ASME B1.1 UN thread form. It is intended that designs […]