DIN 6927

Prevailing torque type all-metal nuts with flange

English 1983
0.000
DIN
Detailed Information

This standard gives specifications for prevailing torque type all-metal nuts with flange, with metric threads with
diameters from 5 to 20 mm, assigned to product grade A.

If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding materials other than those specified in DIN 267 Part 15, resistance to corrosion or the like, these shall be the subject of particular agreement at the time of ordering (see also “Field of application” clause in DIN 267 Part 15).

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 913
1980
English

Hexagon socket set screws with flat point – ISO 4026 modified

ISO 4026 specifies product grade A hexagon socket set screws with flat points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
DIN
DIN 82
1973
English

Knurls

Compared with the January 1940 issue of DIN 82, the standard denomination "knurl" has been adopted for all types, since the previous denomination "diamond knurling" and "negative diamond knurli [...]
DIN
DIN 71412
1987
German

Kegelschmiernippel

Der Kegelschmiernippel eignet sich zum Abschmieren mit Handschmierpressen wie auch kraftbetätigten Schmierpressen. Die Verbindung mit dem Greifmundstück der Schmierpresse ist formschlüssig, dad [...]
ASTM
ASTM A307
2010
English

CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade" den [...]
IFI
IFI-117
2008
English

PULL THROUGH MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements for inch series pull through mandrel blind rivets suitable for use in engineering assemblies where load trans [...]
DIN
DIN 675
1993
English

Flat countersunk head rivets with nominal diameters from 3 to 5 mm

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal flat countersunk head rivets with nominal diameters from 3 to 5 mm.
DIN
DIN 188
1987
English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as are sp [...]
ISO
ISO 7414
1984
English

Hexagon nuts for structural bolting with large width across flats. style 1 – Product grade B – Property class 10

This International Standard gives specifications for large series hexagon nuts, style 1, property class 10, with metric dimensions and thread sizes from M12 up to and including M36, for use wit [...]
ASME
ASME B18.2.3.4M
1999
English

METRIC HEX FLANGE SCREWS

1.1 This standard covers the complete dimensional and general data for metric series hex flange screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this st [...]