DIN 7168

General tolerances for linear and angular dimensions and geometrical tolerances (not to be used tor new designs)

English 1991
0.000
DIN
Detailed Information

This standard is intended to ensure that all drawings prepared to date In which general tolerances have been specified on the basis of DIN 7168 will remain intelligible and be interpreted correctly, and also to inform the user of this standard that, for all new designs, tolerances are to be specified on the basis of ISO 2768 Parts 1 and 2.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 921
1986
English

Slotted pan head screws with large head

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
MIL
MIL-DTL-1222J
2000
English

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, [...]
ASME
ASME B18.2.1
2010
English

SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)

1.1.1 This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering ga [...]
5.01
Others
BS 3643-1
1981
English

Specification for ISO metric screw threads — Part 1: Principles and basic data

This Part of this British Standard specifies the principles and basic data for single-start, parallel screw threads having the ISO basic profile for triangular screw threads. Data for 1,0 mm to [...]
3.01
BS EN
BS EN 14399-2
2015
English

High-strength structural bolting assemblies for preloading Part 2: Suitability for preloading

This European Standard specifies the technical requirements for high-strength structural bolting assemblies in order to ensure the suitability for preloading of bolted connections in metallic s [...]
DIN
DIN 1144
1973
English

Nails for the installation of wood wool composite panels

Nails shall be made of steel (grade at manufacturer's discretion) and have a galvanized (Zn) or metallized (me) finish.
ISO
ISO 7414
1984
English

Hexagon nuts for structural bolting with large width across flats. style 1 – Product grade B – Property class 10

This International Standard gives specifications for large series hexagon nuts, style 1, property class 10, with metric dimensions and thread sizes from M12 up to and including M36, for use wit [...]
JIS
JIS B 0271
2004
English

Three wires for screw thread measuring and four wires for screw thread measuring

This Japanese Industrial Standard specifies three wires and four wire for screw thread measuring (hereafter referred to as “wires”) which consist of a set of three and four wires respectively, [...]
DIN
DIN 7337
1991
English

Break mandrel blind rivets

This standard specifies dimensions of, and requirements regarding material, design, strength and finish, as well as the relevant methods of test for, blind rivets of the self -plugging type. Su [...]