DIN 74361-3

Disc wheels for motor vehicles and trailers – Dimensions and fasteners for attachment with centring on wheel bore

English 1979
0.000
DIN
Detailed Information

This standard specifies requirements for the attachment of disc wheels with 15° tapered rims as covered in DIN 78 022, on commercial vehicles and trailers.

Design-related details left unspecified, such as shape of wheel disc and connection between rim and wheel disc, are to be selected as appropriate.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.10
2006
English

TRACK BOLTS AND NUTS

This Standard covers the complete general and dimensional data for inch series oval neck and elliptic neck track bolts and square nuts intended for use with these bolts, and recognized as a […]
DIN
DIN 601
1970
English

Hexagon Bolts without Hexagon Nut – with Hexagon Nut – Type g

This standard agrees essentially with the following ISO Recommendations issued by the International Organization for Standardization (ISO): ISO/R 272-1968 ISO/R 733-7968 ISO/R 855-1968 ISO/R 888-1968
DIN
DIN 965
1971
English

Cross Recessed Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)

Normally these screws are made in the sizes !or which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according […]
DIN
DIN 1587
1987
English

Hexagon domed cap nuts

This standard specifies requirements for M 4 to M 24 coarse and fine pitch thread hexagon domed cap nuts assigned to product grade A or B. If, in special cases, nuts are to comply with spe […]
DIN
DIN 50150
1976
English

Testing of Steel and Cast Steel – Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength

The conversion table In this Standard applies - to hardness values determined according to the following standards: ~DIN 50 103 Part 1 and Part 2 (Rockwell) ~DIN 50 133 Part 1 (Vickers) and […]
ISO
ISO 263
1973
English

ISO inch screw threads – General plan and selection for screws, bolts and nuts – Diameter range 0.06 to 6 in

This International Standard tabulates ISO inch screw threads {except for pipe threads) having the basic profile for triangular screw threads specified in ISO 68, ISO general purpose screw t […]
ASTM
Abstract of ASTM A194/A194M
2010
English

CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE, OR BOTH

1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1/4 through 4 in. nominal. It also covers austenitic stainless steel nuts in […]
ANSI
ANSI B18.2.4.2M
1995
English

METRIC HEX NUTS, STYLE 2

1.1 This standard covers the complete general and dimensional data for metric hex nuts, Style 2, recognized as American National Standard. 1.2 The inclusion of dimensional data in this stan […]
ASME ANSI
ASME/ANSI B18.18.2M
1993
English

INSPECTION AND QUALITY ASSURANCE FOR HIGH-VOLUME MACHINE ASSEMBLY FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection […]