DIN 7968

Hexagon fit bolts for structural steel bolting for supply with or without nut

English 1989
0.000
DIN
Detailed Information

This standard specifies requirements for M 12 to M 30 hexagon fit bolts assigned to product grade C for use in structural steel bolting.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6887
1968
English

Stressed-type Fastenings with Taper Action – Taper Keys with Gib Head – Keyways – Dimensions and Application

So far no permissible variations have been laid down for the taper on the key and in the keyway. If special conditions make necessary the observance of certain permissible variations these must [...]
DIN
DIN 6908
1995
English

Conical spring washers for screw and washer assemblies

This standard specifies dimensions and technical delivery conditions for conical spring washers which are intended for use with screw and washer assemblies as specified in DIN 6900-5. They are [...]
ISO
ISO 4166
1979
English

Hexagon nuts for fine mechanics – Product grade F

This International Standard gives specifications for hexagon nuu with thread diameters from 1 up to and including 1,4 mm, of product grade F.
ASTM
Abstract of ASTM B695
2000
English

COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL

1.1 This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and including 10 [...]
DIN
DIN 7982
1984
English

Cross recessed countersunk head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for [...]
ASME
ASME B18.31.2
2008
English

CONTINUOUS AND DOUBLE-END STUDS (INCH SERIES)

1.1.1 This Standard covers the complete dimensional and general data for continuous thread and double-end inch-dimensioned studs recognized as American National Standard. The following configur [...]