DIN 797

Special Foundation Bolts

English 1970
0.000
DIN
Detailed Information

Strength category (material): 3.6 according to DIN 267 Part 3
Other strength categories or materials by agreement

Download File
(Log in to download spec.)

Check out other specifications

ANSI ASME
Abstract of ANSI/ASME B1.7M
2001
English

NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS FOR SCREW THREADS

1. ANSI/ASME B1.7M is a standard developed through the procedures of The American Society of Mechanical Engineers. B1.7M is under the jurisdiction of ASME Standards Committee B1. 2. B1.7M estab [...]
DIN
DIN 480
1985
English

Square head bolts with collar and oval half dog point

This standard specifies product grade A square head bolts with collar and oval half dog point, and M 8 to M 24 coarse thread. Where, for special purposes. the bolts are to meet requirements di [...]
DIN EN
DIN EN 10263-2
2002
English

Steel rod, bars and wire for cold heading and cold extrusion Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working – English version of DIN EN 10263-2

This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without [...]
ASTM
ASTM A574
1998
English

Standard Specification for Alloy Steel Socket-Head Cap Screws

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1-A co [...]
DIN
DIN 7984
1985
English

Hexagon socket thin head cap screws

This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to mee [...]
DIN
DIN 50961
2000
German

Galvanische Überzüge – Zinküberzüge auf Eisenwerkstoffen – Begriffe, Korrosionsprüfung und Korrosionsbeständigkeit

Diese Norm gilt nur in Verbindung mit DIN EN 12329, die Anforderungen an galvanisch abgeschiedene Zinküberzüge mit zusätzlicher Behandlung festlegt. In Ergänzung zu DIN EN 12329 legt diese Nor [...]
IFI
IFI-110
2008
English

GLOSSARY OF TERMS RELATING TO BLIND RIVETS

This glossary presents preferred nomenclature and definitions of terms relating to blind rivets. It is intended that this glossary serve as a guide to users and producers to assist them toward [...]
DIN
DIN 913
1980
English

Hexagon socket set screws with flat point – ISO 4026 modified

ISO 4026 specifies product grade A hexagon socket set screws with flat points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
ISO
ISO 14580
2001
English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.