DIN 7970

Threads and thread ends for tapping screws (modified version of ISO 1478)

English 1984
0.000
DIN
Detailed Information

This standard specifies the thread and thread ends of tapping screws of thread sizes from ST 1,5 up to and including ST 9,5.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1479
1998
English

Hexagon turnbuckles

This standard specifies dimensions and technical delivery conditions for sizes M6 to M30 hexagon turnbuckles with widths across flats as in ISO 272, of product grade A and made of steel or austenitic steel.
DIN
DIN 7970
1984
English

Threads and thread ends for tapping screws (modified version of ISO 1478)

This standard specifies the thread and thread ends of tapping screws of thread sizes from ST 1,5 up to and including ST 9,5.
JIS
JIS B 1054-1
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 1 : Bolts, screws and studs

This part of JIS B 1054 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower tempe […]
ASTM
Abstract of ASTM A490M
1993
English

HIGH-STRENGTH STEEL BOLTS, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS [METRIC]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inclusive. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Jo […]
ASME
ASME B18.2.3.9M
1999
English

METRIC HEAVY HEX FLANGE SCREWS

This standard covers the complete dimensional and general data for metric series heavy hex flange screws recognized as American National Standard.
DIN EN
DIN EN 10083-2
1991
English

Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2

1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — wide flats, — hot or cold rolled sheet/plate and strip, — hammer and drop forgings (see note 2), ma […]