DIN 7971

Pan Head Tapping Screws with Slot

English 1970
0.000
DIN
Detailed Information

Bracketed nominal diameters should be avoided wherever possible.

Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10083-1
2006
German

Vergütungsstähle – Teil 1: Allgemeine technische Lieferbedingungen; Deutsche Fassung EN 10083-1:2006

Dieser Teil der EN 10083 enthält die allgemeinen technischen Lieferbedingungen für ⎯ Halbzeug, warmgeformt, zum Beispiel Vorblöcke, Knüppel, Vorbrammen (siehe Anmerkungen 2 und 3), ⎯ Stabstahl [...]
DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
ASME
ASME B18.5.2.3M
1998
English

ROUND HEAD SQUARE NECK BOLTS WITH LARGE HEAD [METRIC SERIES]

This standard covers the complete general and dimensional data for metric series round head square neck bolts with large head recognized as American National Standard.
DIN EN
DIN EN 28752
1993
English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.
ASTM
ASTM F594
2009
English

STAINLESS STEEL NUTS

This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications re [...]
ASTM
ASTM F1941/F1941M
2015
English

Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

1.1 This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with unified inch and metric screw threads, but it may al [...]
5.01
DIN
DIN 7982
1984
English

Cross recessed countersunk head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for [...]
ASTM
ASTM C1513
2010
English

STEEL TAPPING SCREWS FOR COLD-FORMED STEEL FRAMING CONNECTIONS

This specification covers steel self-drilling and self-piercing tapping screws for the connection of cold-formed steel members manufactured in accordance with Specifications C645 and C955. This [...]
DIN
DIN 611
1990
English

Overview of standards for rolling bearings

This standard provides an overview of DIN Standards dealing with rolling bearings and related International Standards.