DIN 798

Special Foundation Nuts for Special Foundation Bolts according to DIN 797

English 1972
0.000
DIN
Detailed Information

Strength category or material: 5 according to DIN 267 Sheet 4
Other strength categories or materials by spociel agreement.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 35275
1999
English

SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CORROSION RESISTING STEEL, PASSIVATED, UNC-2A

DRILLED HOLE IS TO BE APPROXIMATELY AT RIGHT ANGLES TO THE SLOT AND MAY BE PERMITTED TO BREAK THROUGH THE BOTTOM OF THE SLOT. ALL SHARP EDGES SHALL BE REMOVED.
DIN
DIN 924
1986
English

Slotted raised countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
ISO
ISO 2768-1
1989
English

General tolerances — Part 1 : Tolerances for linear and angular dimensions without individual tolerance indications

This part of ISO 2768 is intended to simplify drawing indications and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four toleranc [...]
ASTM
ASTM A108
2007
English

Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

1.1 This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil to chemical compositions. Cold-finished bars are suitable for heat treatment, for ma [...]
DIN EN
DIN EN 20898-1
1992
English

Mechanical properties of fasteners – Bolts, screws and studs (ISO 898-1 : 1988) English version of DIN EN 20 898 Part 1

This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1) . Properties will vary at higher and lower temperature.
ASME
ASME B18.1.2
2006
English

LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER

This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufact [...]
Custom
General Motors | GM6174M
2001
English

Corrosion Protective Coatings Phosphate/Organic/Oil Type

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, organic [...]
DIN
DIN 267-5
1986
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Annahmeprüfung – ISO 3269 Ausgabe 1984 modifiziert

1.1 Diese Norm enthält ein Verfahren, welches der Besteller (Verbraucher) bei seiner Eingangsprüfung anwenden kann, um zu entscheiden, ob ein Los von Verbindungselementen, sofern bai Bestellung [...]
DIN
DIN 480
1985
English

Square head bolts with collar and oval half dog point

This standard specifies product grade A square head bolts with collar and oval half dog point, and M 8 to M 24 coarse thread. Where, for special purposes. the bolts are to meet requirements di [...]