DIN 7981

Pan Head Tapping Screws with Recessed Head

English 1970
0.000
DIN
Detailed Information

Bracketed nominal diameters should be avoided wherever possible.

Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data.

Technical conditions of delivery and material according to DIN 267 Sheet 12.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7987
1972
German

Senkschrauben mit Kreuzschlitz (Senkköpfe bisherige Form)

Senkschrauben nach dieser Norm sind für eine z. Z. noch unbestimmte Dauer nur noch für Ersatzbedarf und nur noch für bereits vorhandene Konstruktionen anzuwenden. Für Neukonstruktionen sind anstelle von Schrauben nach DIN 7987 nur solche der betreffenden Gewindemaße nach DIN 965 zu verwenden.
DIN
DIN 965
1971
English

Cross Recessed Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)

Normally these screws are made in the sizes !or which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according to DIN 6900.
DIN EN
DIN EN 10083-1
2006
German

Vergütungsstähle – Teil 1: Allgemeine technische Lieferbedingungen; Deutsche Fassung EN 10083-1:2006

Dieser Teil der EN 10083 enthält die allgemeinen technischen Lieferbedingungen für ⎯ Halbzeug, warmgeformt, zum Beispiel Vorblöcke, Knüppel, Vorbrammen (siehe Anmerkungen 2 und 3), ⎯ Stabstahl (siehe Anmerkung 2), ⎯ Walzdraht, ⎯ Breitflachstahl, ⎯ warmgewalztes Blech und Band, ⎯ Schmiedes […]
DIN
DIN 986
2000
English

Prevailing torque type hexagon domed cap nuts with non-metallic insert

This standard specifies dimensions and technical delivery conditions for sizes M4 to M20 prevailing torque type hexagon domed cap nuts with non-metallic insert of product grades A (up to M16) and B (M20).
DIN
DIN 7513
1995
English

Hexagon head and slotted head thread cutting screws – Dimensions, requirements and testing

This standard specifies dimensions. requirements and test methods for heat-treated hexagon head and slotted head thread cutting screws with an ISO metric thread as specified in DIN 13-12, with cutting flutes extending from the point of the screw to its head, and designed to cut their mati […]
DIN
DIN 1587
1987
English

Hexagon domed cap nuts

This standard specifies requirements for M 4 to M 24 coarse and fine pitch thread hexagon domed cap nuts assigned to product grade A or B. If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, these shall be s […]