DIN 7985

Recessed Raised Cheese (Fillister) Head Screws

English 1972
0.000
DIN
Detailed Information

Normally, these screws are manufactured in the sizes for which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according to DIN 6900.
Recesses and depth gauges according to DIN 7962.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 928
1983
English

Square weld nuts

The May 1970 edition of DIN 928 specified property class 8 with the suffix "weldable" for weld nuts. In the meantime, the proof loads for nuts in international specifications have been raised ( [...]
ASTM
Abstract of ASTM A490
2002
English

STRUCTURAL BOLTS, ALLOY STEEL, HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH

1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi. 1.2 These bolts are intended for use in st [...]
ASTM
Abstract of ASTM A320/A320M
2010
English

ALLOY-STEEL AND STAINLESS STEEL BOLTING MATERIALS FOR LOW-TEMPERATUR SERVICE

1.1 This specification covers alloy steel bolting materials for pressure vessels, valves, flanges, and fittings for low-temperature service. See Specification A962/A962M for the definition of b [...]
ISO
ISO 898-5
1980
English

Mechanical properties of fasteners – Part 5 : Set screws and similar threaded fasteners not under tensile stresses

This International Standard specifies the mechanical properties of set screws and similar fasteners not under tensile stresses in the range from 1,6 up to and including 39 mm thread diameter wh [...]
ASTM
ASTM F594
2009
English

STAINLESS STEEL NUTS

This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications re [...]
ASTM
Abstract of ASTM A307
2000
English

CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade" de [...]