DIN 7990

Steel hexagon head bolts for structural steel bolting, for supply with hexagon nuts

English 1999

0.000

Detailed Information

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon head bolts of product grade C for use in structural steel bolting. It also specifies the nuts and washers to be used.

Download File

(Log in to download spec.)

Check out other specifications

DIN EN

DIN EN 28749

1992

English

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.

DIN

DIN 267-2

1984

English

Fasteners – Technical delivery conditions – Design and dimensional accuracy

This standard supplements DIN ISO 4759 Part 1 and applies to those product standards (dimensional standards) in which DIN 267 Part 2 is referred to, e.g. with regard to the surface roughness of [...]

ASTM

Abstract of ASTM F594

2002

English

STAINLESS STEEL NUTS

1.1 This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a number of alloys in common use and intended for service applications [...]

ISO

ISO 5864

1978

English

ISO inch screw threads – Allowances and tolerances

This International Standard specifies a system of allowances and tolerances for standard thread series, covering the range of diameters from 0.06 to 6 in, and pitches from 80 to 4 threads per inch.

DIN

DIN 188

1987

English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as are sp [...]

DIN EN

DIN EN 20898-6

1992

English

Mechanical properties of fasteners – Nuts with specified proof load values – Fine pitch thread (ISO 898-6 : 1988) English version of DIN EN 20 898 Part 6

This part of ISO 898 specifies the mechanical properties of nuts with specified proof load values: - with nominal thread diameters, d, from 8 mm up to and including 39 mm; - of triangular ISO t [...]

DIN

DIN 6883

1956

English

Taper Key Torque Transmission – Parallel Keys – Dimensions and Application

No figures for permissible variations of tapers on keys and in hub keyways have so far been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]

DIN

DIN 6915

1999

English

Steel hexagon nuts with large width across flats for high-strength structural bolting

This standard specifies dimensions and technical delivery conditions for steel hexagon nuts with large width across flats for use with DIN 6914 high-strength bolting in friction grip and shear [...]

ASME

ASME B18.2.3.10M

1996

English

SQUARE HEAD BOLTS [METRIC SERIES]

This standard covers the general and dimensional data for standard metric series square head bolts.