DIN 835

Studs with a length of engagement equal to about 2 d

English 1995
0.000
DIN
Detailed Information

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in aluminium alloys. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk6 as in DIN 13-51, unless the stud is designated Fo (‘without interference-fit thread’) or Sn4.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ABSTRACT OF ASME B1.2
2007
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for the th [...]
ISO
ISO 1580
1983
English

Slotted pan head screws – Product grade A

This International Standard specifies the characteristics of slotted pan head screws in product grade A and with thread sizes M 1.6 to M 10 inclusive.
DIN
DIN 316
1983
English

Wing screws

In June 1975, drafts of the planned new editions of DIN 315 (wing nuts) and of DIN 316 (wing screws) were published; they made a distinction between Part 1 "heavy duty type" and Part 2 "light d [...]
ANSI
ANSI B18.16.1M
1995
English

MECHANICAL AND PERFORMANCE REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS

1.1 This standard covers the mechanical and performance requirements for prevailing torque type steel metric hex and hex flange nuts, - With hex nut nominal thread diameters M3 thru M36; - With [...]
JIS
JIS B 0176-4
2002
English

Threading tools—Vocabulary Part 4 : Thread rolling dies

This part of JIS B 0176 specifies terms and definitions related to thread rolling dies to be used mainly for metal workings in general.
JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainless s [...]
ISO
ISO 4166
1979
English

Hexagon nuts for fine mechanics – Product grade F

This International Standard gives specifications for hexagon nuu with thread diameters from 1 up to and including 1,4 mm, of product grade F.
Custom
John Deere | JDM F13
2015
English

Specification for Non-Electrolytically Applied Zinc Flake Coatings

1.1 JDM F13 specifies requirements for nine grades of corrosion resistant non-electrolytically applied zinc flake coatings on ferrous parts, with three levels of corrosion resistance, and three [...]
DIN
DIN 1624
1987
English

Cold reduced mild unalloyed steel strip in widths not exceeding 650mm – Technical delivery conditions

1.1 This standard applies to cold reduced flat products (strip and lengths cut from it), without coating, in widths not exceeding 650 mm and thicknesses up to 6mm, made from mild unalloyed stee [...]