DIN 914

Hexagon socket set screws with cone point – ISO 4027 modified

English 1980
0.000
DIN
Detailed Information

ISO 4027 specifies product grade A hexagon socket set screws with cone points with metric dimension and thread diameters from 1,6 up to and including 24 mm.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 724
1993
English

ISO general-purpose metric screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.
DIN
DIN 1448-1
1970
English

Conical Shaft Ends – with External Thread – Dimensions

For connection with ISO Recommendation ISO/R 775-1969, see Explanations. Conical shaft ends are intended to take belt pulleys, couplings and gears. Sizes and details such as chamfer, centre bore and surface quality, which are not specified, are to be designed as appropriate.
5.01
DIN
DIN 5417
1976
English

Securing Parts for Rolling Bearings – Snap Rings for Bearings with Ring Groove

For connection with DIN 616 and ISO 464, see Explanations. This Standard specifies the dimensions of snap rings required for securing bearing with ring groove according to DIN 616, diameter series 0, 2, 3 and 4.
JIS
JIS B 1022
1999
English

Tolerances for fasteners— Part 3 : Plain washers for bolts, screws and nuts—Product grades A and C

This Japanese Industrial Standard specifies a selection of tolerances for use in the preparation of the product standards for plain washers, grades A and C, for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Deviations from the tolerances specif […]
ASTM
Abstract of ASTM F568M
1996
English

CARBON AND ALLOY STEEL EXTERNALLY THREADED METRIC FASTENERS

1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 through M100 suited for use in general engineering applications. 1.2 This specification does not cov […]
DIN
DIN 6332
1993
English

Grub screws with thrust point

This standard specifies requirements for grub screws with a thrust point which, together with controlling elements, wing nuts or knurled nuts, are suitable for clamping with the thrust point directly or using a DIN 6311 thrust pad attached to the thrust point.