DIN 917

Hexagon cap nuts

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M 4 to M 72 coarse and fine pitch thread hexagon cap nuts assigned to product grade A.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 1234
1976
English

Split pins – Metric series

This International Standard specifies the dimensions of split pins of the metric series.
DIN
DIN 7995
1984
English

Cross recessed raised countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the cont [...]
ISO
ISO 14583
2001
English

Hexalobular socket pan head screws

This International Standard specifies the characteristics of hexalobular socket pan head screws in product grades A and with thread sizes from M2 up to and including M10.
ISO
ISO 3800-1
1977
English

Threaded fasteners – Axial load fatigue testing – Part 1 : Test methods

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners.
ASTM
ABSTRACT OF ASTM F1852
2008
English

“TWIST OFF” TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES, STEEL, HEAT TREATED, 120/105 KSI MINIMUM TENSILE STRENGTH

1.1 This specification covers two types of heat treated, steel, tension control bolt-nut-washer assemblies, also referred to as “sets." These assemblies are capable of developing a minimum pred [...]
DIN EN
DIN EN 24017
1992
English

Hexagon head screws – Product grades A and B (ISO 4017:1988) English version of DIN EN 24 017

This International Standard gives specifications for hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and [...]
DIN
DIN 13-13
1983
English

ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes

This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maximum d [...]
DIN
DIN 7998
1975
English

Threads and Thread Ends for Wood Screws

Designation of a wood screw thread of nominal diameter d1 = 4 mm: Thread 4 DIN 7998
DIN
DIN 434
2000
English

Square taper steel washers for use with channel sections

This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel channel sections using bolts up to property class 5.6.