DIN 918

Fasteners – Terminology – Spelling of terms – Abbreviations

English 1979
0.000
DIN
Detailed Information

This standard applies to fasteners as described in clause 2 and specifies terms for them, terms for the most important characteristics of the parts and their abbreviations. When specifying descriptors in product standards, spelling according to precedence of the characteristics is obligatory.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1013
1994
English

Countersunk head screws— Head configuration and gauging

This Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the resp [...]
ISO
ISO 7092
2000
English

Plain washers – Small series – Product grade A

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters [...]
ANSI
ANSI B18.2.3.5M
1995
English

METRIC HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not i [...]
DIN
DIN 6799
1981
English

Lock washers (retaining washers) for shafts

Lockwashers within the context of this standard are retaining washers for the axial retention of components on shafts. They are inserted radially in grooves and enclose the groove base under sp [...]
DIN
DIN 6900-4
1990
English

Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer

This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated loc [...]
ISO
ISO 2904
1977
English

ISO metric trapezoidal screw threads – Basic dimensions

This International Standard specifies the basic dimensions for ISO metric trapezoidal screw threads according to ISO 2902. The values refer to the basic profiles according to ISO 2901.
5.01