DIN 927

Slotted shoulder screws

English 1986
0.000
DIN
Detailed Information

The following amendments have been made in comparison with the August 1972 edition.
a) Size M1,8 has been deleted because there is no demand for it.
b) The previous design m as specified in DIN 267 Part 2, April 1968 edition, has been replaced by product grade F as specified in DIN 267 Part 6 and product grade A as specified in ISO 4759 Part 1.
c) Limiting dimensions calculated from the permissible tolerances have been included.
d) Some values of slot depth have been amended.
e) Property class 5.8 has been replaced by property class 14H.
f) The technical delivery conditions have been amended.
g) The content of the standard has been editorially revised.
h) The example of designation has been amended.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 960
1970
German

Sechskantschrauben – Metrisches Feingewinde – Ausführung m und mg

Eingeklammerte Größen sind möglichst zu vermeiden. Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen noch DIN 267
ASTM
Abstract of ASTM F1136
1998
English

CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or […]
ASTM
ASTM F835M
1998
English

Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws M3 through M20 thread sizes h […]
ASTM
ASTM A513/A513M
2012
English

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing. 1.2 This specification covers mechanical tubing made from hot- or cold-r […]
DIN
DIN 431
2000
English

Pipe nuts with thread as in ISO 228-1

This standard specifies dimensions and technical delivery conditions for sizes G 1/8 to G 6 (hexagon and octagon) pipe nuts with thread as in ISO 228-1 and of product grades B and C.
DIN EN
DIN EN 28734
1992
English

Hardened parallel pins (ISO 8734 : 1987) English version of DIN EN 28 734

This International Standard specifies the characteristics of through hardened and case hardened parallel pins (dowel pins) with metric dimensions and nominal diameters, d, from 1 to 20 mm inclusive.
DIN EN
DIN EN 24035
1992
English

Hexagon thin nuts (chamfered) Product grades A and B (ISO 4035 : 1986) English version of DIN EN 24 035

This International Standard gives specifications for chamfered hexagon thin nuts, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade […]
DIN EN
DIN EN 1667
1998
English

Prevailing torque type all-metal hexagon nuts with flange, with metric fine pitch thread (ISO 12126: 1997, modified) English version of DIN EN 1667

This European Standard specifies the characteristics of prevailing torque type all metal hexagon nuts with flange and metric fine pitch thread with nominal thread diameters d from 8 mm up t […]
DIN EN
DIN EN 28736
1992
English

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.