DIN 928

Square weld nuts

English 2000
0.000
DIN
Detailed Information

This standard specifies requirements for sizes M4 to M16 coarse and fine pitch thread square weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN EN ISO 898-1.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1060
2003
English

Mechanical and performance requirements of case hardened and tempered metric thread rolling screws

This Standard specifies the requirements for case hardened and tempered metric thread rolling screws. Thread rolling screws according to this Standard produce female threads which fit general p [...]
ASME
ASME B18.8.1
2005
English

CLEVIS PINS AND COTTER PINS (INCH SERIES)

This standard covers the complete dimensional and general data for clevis pins recognized as "American National Standard."
ASTM
Abstract of ASTM F812/F812M
2002
English

SURFACE DISCONTINUITIES OF NUTS

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of nuts with nominal diameters 1/4 in. [...]
DIN
DIN 564
1995
English

Hexagon set screws with small hexagon, half dog point and flat cone point

This standard specifies dimensions and technical delivery conditions for coarse and fine pitch thread M6 to M36 hexagon set screws with small hexagon, half dog point and flat cone point, assign [...]
DIN
DIN 968
1994
English

Cross recessed pan head tapping screws with collar

This standard specifies requirements for ST 2,9 to ST 6,3 cross recessed pan head tapping screws with collar. See DIN 962 (or the standards referred to therein) for special screw types or finishes.
ANSI
ANSI B18.2.4.4M
1993
English

METRIC HEX FLANGE NUTS

1.1 This standard covers the complete general and dimensional data for metric hex flange nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
DIN
DIN 7603
2001
English

Ring seals and gaskets

This standard specifies dimensions and materials for ring seals and flat or filled gaskets designed for use with compression couplings (e.g. as specified in DIN 3850 or DIN 7601) or pipe plugs [...]
DIN EN
DIN EN 28749
1992
English

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.
DIN
DIN 6880
1975
English

Bright steel for key bars – Dimensions, limit deviations, mass

This Standard applies to bright key steel in bars of square, rectangular or flat-rectangular cross-section in the nominal dimensions indicated in Tables 1 and 2 and in the steel specified in Se [...]