DIN 929

Hexagon weld nuts

English 2000
0.000
DIN
Detailed Information

This standard specifies requirements for sizes M3 to M16 coarse and fine pitch thread hexagon weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN EN ISO 898-1. Hexagon weld nuts with flange are specified in DIN 977.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.2.8
1999
English

CLEARANCE HOLES FOR BOLTS, SCREWS, AND STUDS

This standard covers the recommended clearance hole sizes for #0 through 1.5 inch fasteners in three classes of clearance using a close-, normal-, and loose-fit category.
DIN
DIN 74361-3
1979
English

Disc wheels for motor vehicles and trailers – Dimensions and fasteners for attachment with centring on wheel bore

This standard specifies requirements for the attachment of disc wheels with 15° tapered rims as covered in DIN 78 022, on commercial vehicles and trailers. Design-related details left unsp […]
DIN EN
DIN EN 1661
1998
English

Hexagon nuts with flange (ISO/DIS 4161 : 1996, modified) English version of DIN EN 1661

This European Standard specifies the characteristics of hexagon nuts with flange, with threads from M5 to M20 inclusive, of product grade A for threads up to and including M 16 and product […]
ANSI ASME
Abstract of ANSI/ASME B1.16M
1992
English

GAGES AND GAGING FOR METRIC M SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on M series metric screw threads, and covers the specifications and dimensions for the thread gages and mea […]
DIN
DIN 928
2000
English

Square weld nuts

This standard specifies requirements for sizes M4 to M16 coarse and fine pitch thread square weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in D […]
JIS
JIS B 1071
1985
English

Method of verification for size and geometry of threaded fasteners

This Japanese Industrial Standard specifies the methods of verifying whether the characteristic values related to the forms and dimensions given to threaded fasteners, hereinafter referred […]
ISO
ISO 8015
2011
English

Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules

This International Standard specifies fundamental concepts, principles and rules valid for the creation, interpretation and application of all other International Standards, Technical Speci […]
SAE
SAE USCAR-1
2005
English

SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES

This procedure is used to test and evaluate the resistance of fastener surface finishes to laboratory salt spray testing.
ISO
ISO 1482
1983
English

Slotted countersunk (flat) head tapping screws (common head style)

This International Standard specifies the characteristics of slotted countersunk (flat) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.