DIN 934

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, they shall be selected in accordance with the relevant standards.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 8734
1997
English

Parallel pins of hardened steel and martensitic stainless steel (Dowel pins)

This International Standard specifies the characteristics of parallel pins (dowel pins) of steel, through hardened or case hardened and martensitic stainless steel with nominal diameters, d, from 1 mm to 20 mm inclusive.
JIS
JIS B 1081
1997
English

Threaded fasteners— Axial load fatigue testing— Test methods and evaluation of results

This Japanese Industrial Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless otherwise agreed, the tests are of the fluctuating tension type and are carried out at room tem […]
DIN
DIN 1449
1970
English

Conical shaft ends with internal thread – Dimensions

This standard specifies dimensions for the conical shaft ends with internal thread which are intended to accommodate belt pulleys, couplings and gears. See DIN 1448-1 for conical shaft ends with external thread.
ASTM
ASTM A354
2007
English

QUENCHED AND TEMPERED ALLOY STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS

This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in diameter for application at normal atmospheric temperatures, where high strength is required and for limited app […]
ASTM
ASTM F467
2008
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications. 1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this […]
ASME ANSI
ASME/ANSI B18.3.3M
1993
English

METRIC HEXAGON SOCKET HEAD SHOULDER SCREWS

1.1.1 This standard contains complete dimensional, mechanical, and performance requirements for Metric Series Hexagon Socket Head Shoulder Screws with nominal shoulder diameters from 6.5 mm to 25 mm recognized as American National Standard. Also included are appendices covering formulas f […]