DIN 936

Hexagon Thin Nuts (Old Type)

English 1976
0.000
DIN
Detailed Information

Hexagon nuts according to this Standard are still specified for a period not as yet determined for replacement needs and for existing designs only.

For new designs, hexagon nuts according to DIN 439 are recommended which conform with the conclusions of Technical Committee ISO/TC 2 “Fasteners” of the International Organization for Standardization (ISO).

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 934
1987
English

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply [...]
IFI
IFI-544
1998
English

METRIC ROUND HEAD RIBBED NECK BOLTS

This standard covers the complete general and dimensional data for metric series round head ribbed neck bolts in sizes M5 thru M14, intended for general engineering applications.
IFI
IFI-553
1999
English

METRIC DRIVE PIN BLIND RIVETS

This standard establishes the requirements for metric drive pin blind rivets suitable for use in joining the component parts of an assembly.
BS EN ISO
BS EN ISO 2320
2008
English

Prevailing torque type steel nuts — Mechanical and performance properties (ISO 2320:2008)

This International Standard specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It include [...]
DIN
DIN 610
1971
German

Sechskant-Paßschrauben mit kurzem Gewindezapfen

Bezeichnung einer Sechskant-Paßschraube mit Gewinde d1 = M20, Länge l = 80 mm und Festigkeitsklasse 5.6: Paßschraube M20 x 80 DIN 610 - 5.6 Bezeichnung einer Sechskant-Paßschraube mit Gewinde d [...]
IFI
IFI-115
2007
English

FLANGE 12-POINT SCREWS

IFI-115 is a standard developed through the procedures of Industrial Fasteners Institute. IFI-115 was first published in 1970 and modestly revised and reissued in 1986 and 2002.
DIN
DIN 675
1993
English

Flat countersunk head rivets with nominal diameters from 3 to 5 mm

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal flat countersunk head rivets with nominal diameters from 3 to 5 mm.
DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical condi [...]
JIS
JIS B 0209-4
2001
English

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot -dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming to JIS B 0205-3 having a basic profile acco [...]