DIN 961
Sechskantschrauben- Gewinde annähernd bis Kopf – Metrisches Feingewinde – Ausführung m und mg
German
1970
0.000
Detailed Information
Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt.
Technische Lieferbedingungen nach DIN 267
Download File
(Log in to download spec.)
Check out other specifications
1978
English
Spring-Type Straight Pins (Roll Pins) Light-weight Type
Spring-type straight pins (also known as roll pins) to this Standard are pins made of spring steel, rolled from strip and having a slot along their length and one or two chamfers to permit insertion. They are mainly used for connecting two or more parts of an assembly and are suitable for […]
1997
English
Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]
1.1.1 Type 1-Bolts made of medium-carbon steel. 1.1.2 Type 2-Bolts made from what is generally described as low-carbon martensite steel. 1.1.3 Type 3-Bolts made of steel having atmospheric corrosion resistance and weathering characteristics comparable to that of the steel covered in Speci […]
1995
English
Hexagon fit bolts
This standard specifies dimensions and technical delivery conditions for M8 to M52 hexagon fit bolts, assigned to product grade A (for size M10 or less) or product grade B (for size M12 or greater). For hexagon fit bolts of sizes greater than M39, the specifications of this standard apply […]
1975
English
Hole sizes before threading
This Japanese Industrial Standard specifies the diameters of holes to be drilled before threading the following screw threads or before carrying on similar works, hereinafter referred to as the hole size before "threading". The hole sizes before threading for the thread sizes M1.7 , M2.3 […]
1973
English
Helical Springs Made of Round Wire – Quality Specifications for Cold Coiled Compression Springs
This Standard applies to helical compression springs made of spring-hard round wire which, after cold coiling, are subjected only to tempering to relieve residual stresses. Cold coiled compression springs can be made with wire up to about 17 mm diameter. In the range from 10 to 17 mm wire […]
1972
English
Lifting Eye Bolts
The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new edition of the Standard solely prescribes C 15, which is somewhat more ductile than St 34. The technic […]