DIN 965

Cross recessed countersunk flat head screws

English 1990
0.000
DIN
Detailed Information

This standard specifies requirements for M 1,6 to M 10 cross recessed countersunk head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or finishes.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.2.2
2010
English

NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)

This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, recognized [...]
JIS
JIS B 0209-4
2001
English

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot -dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming to JIS B 0205-3 having a basic profile acco [...]
DIN
DIN 1804
1971
English

Slotted Round Nut for Hook Spanner – ISO Metric Fine Thread

Material (strength properties): at least 5 according to DIN 267 Sheet 4 Type: w unhardened and unground h hardened to HRC 60 ± 2 with the exception of the thread, faces ground For hook wrenches [...]
Others
BS 3643-1
1981
English

Specification for ISO metric screw threads — Part 1: Principles and basic data

This Part of this British Standard specifies the principles and basic data for single-start, parallel screw threads having the ISO basic profile for triangular screw threads. Data for 1,0 mm to [...]
3.01
JIS
JIS B 0202
1999
English

Parallel pipe threads

This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc. The parallel inter [...]
DIN
DIN 267-15
1983
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Muttern mit Klemmteil

Die in dieser Norm aufgeführten Festigkeitsklassen, die mechanischen und funktionellen Eigenschaften und die Prüfverfahren gelten für Muttern mit Klemmteil - mit Gewinde-Nenndurchmesser von 3 b [...]
ISO
ISO 7378
1983
English

Fasteners – Bolts, screws and studs – Split pin holes and wire holes

This International Standard lays down the dimensions and position of split pin holes and wire holes for bolts, screws and studs, recommended for use unless otherwise specified in the appropriat [...]
ISO
ISO 7093
1983
English

Plain washers – Large series – Product grades A and C

This International Standard lays down the specification for plain washers of product grades A and C with outside diameter three times nominal size (nominal thread diameter), preferable for hexa [...]
ASME
ASME B18.1.2
2006
English

LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER

This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufact [...]