DIN 966

Cross recessed raised countersunk (oval) head screws

English 1984
0.000
DIN
Detailed Information

If raised countersunk oval head screws with length tabled below the stepped line are to be supplied threaded up to the head, i.e. deviating from the standard design, the letter A shall be incorporated in the description, in accordance with DIN 962, or the deviating thread length shall be included in the description, again in accordance with DIN 962.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.10
2006
English

TRACK BOLTS AND NUTS

This Standard covers the complete general and dimensional data for inch series oval neck and elliptic neck track bolts and square nuts intended for use with these bolts, and recognized as an Am [...]
DIN EN
DIN EN 10083-2
2006
English

Steels for quenching and tempering – Part 2: Technical delivery conditions for non alloy steels – English version of DIN EN 10083-2:2006-10

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for: — semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083 [...]
DIN
DIN 608
1981
English

Flat countersunk square neck bolts with short square

This standard specifies flat countersunk square neck bolt with short square, with metric threads M 10 and M 12, of product grade C.
DIN
DIN 580
1972
English

Lifting Eye Bolts

The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new editio [...]
ASME
ASME B18.2.3.4M
1999
English

METRIC HEX FLANGE SCREWS

1.1 This standard covers the complete dimensional and general data for metric series hex flange screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this st [...]
ASTM
Abstract of ASTM F812/F812M
2002
English

SURFACE DISCONTINUITIES OF NUTS

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of nuts with nominal diameters 1/4 in. [...]
JIS
JIS B 0208
1978
English

Unified fine screw threads

This Japanese Industrial Standard specifies the basic profile, formulas and basic dimensions for unified fine screw threads used for aircrafts and other purposes of limited necessity.
ISO
ISO 1207
1992
English

Slotted cheese head screws – Product grade A

This International Standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications oth [...]
DIN
DIN 7990
1989
English

Hexagon head bolts for structural steel bolting for supply with nut

This standard specifies requirements for M12 to M30 hexagon head bolts for supply with hexagon nut, assigned to product grade C, for use in structural steel bolting. These bolts shall always be [...]