DIN 97

Slotted countersunk (flat) head wood screws

English 1986
0.000
DIN
Detailed Information

The following amendments have been made in comparison with the March 1975 edition.
a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws.
b) Type g hes been replaced by product grade C.
c) The content of the standard has been revised.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 526
1973
English

Safety Cups for Cheese Head Screws according to DIN 84

Material: St 1303 according to DIN 1623 or St 3 according to DIN 1624 at manufacturer’s choice Finish: without burr
ANSI
ANSI B18.22M
1990
English

METRIC PLAIN WASHERS

This standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications. The inclusion [...]
DIN
DIN 7341
1977
English

Rivet Pins

St = 9 SMnPb 28K according to DIN 1651 or St 50 K + G according to DIN 1652 at manufacturer's choice; if a specific material is required, this is to be agreed.
DIN
DIN 555
1972
English

Hexagon Nuts Metric Thread Type g

Tho dimensions of the hexagon nuts according to this Standard correspond with those indicated in the ISO Recommendation ISO/R 272-1968 published by the International Organization for Standardiz [...]
DIN
DIN 68163
1982
English

Nails for assembling timber pallets

This standard specifies requirements for nails used in the assembly of timber pallets.
JIS
JIS B 1045
2001
English

Fasteners—Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

This Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric bolts, screws a [...]
JIS
JIS B 1112
1995
English

Cross-recessed head wood screws

This Japanese Industrial Standard specifies the cross-recessed head wood screws (Hereafter, referred to as "wood screws".) made of steel wire, stainless steel and brass for general use.
ISO
ISO 2768-1
1989
English

General tolerances — Part 1 : Tolerances for linear and angular dimensions without individual tolerance indications

This part of ISO 2768 is intended to simplify drawing indications and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four toleranc [...]
DIN
DIN 660
1993
English

Round head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal round head rivets with nominal diameters from 1 to 8 mm.