DIN 979

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M6 to M52 hexagon slotted nuts and castle nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16).

If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, they shall be selected in accordance with the relevant standards.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B1.20.5
2004
English

GAGING FOR DRYSEAL PIPE THREADS (INCH)

The scope of this Standard is to provide information regarding practical dryseal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inch [...]
JIS
JIS A 5542
2003
English

Bolts of turnbuckle for building

This Japanese Industrial Standard specifies the bolts of turnbuckle used for building made of carbon steel products, hot-dip zinc coated carbon steel products and stainless steel products (here [...]
ISO
ISO 888
1976
English

Bolts, screws and studs – Nominal lengths, and thread lengths for general purpose bolts

This International Standard specifies nominal lengths for bolts, screws and studs, and thread lengths for general purpose bolts.
DIN
DIN 7968
1989
English

Hexagon fit bolts for structural steel bolting for supply with or without nut

This standard specifies requirements for M 12 to M 30 hexagon fit bolts assigned to product grade C for use in structural steel bolting.
ASME
ASME B18.3
2012
English

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

This Standard covers complete general and dimensional data for various types of hexagon socket cap screws, shoulder screws, set screws, and hexagon keys recognized as an American National Stand [...]
ISO
ISO 3800
1993
English

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless other [...]
ISO
ISO 262
1973
English

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

This International Standard specifies ISO general purpose metric screw threads for screws, bolts and nuts in the diameter range 1 to 39 mm. These selected sizes are recommended also for genera [...]
DIN
DIN 78
2001
English

Bolt end protrusions

This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13 [...]
ISO
ISO 7047
1983
English

Cross recessed raised countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of cross recessed raised countersunk head screws with thread sizes from M 1,6 to M 10 inclusive. If other specifications are required, [...]