DIN 979

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

English 2000
0.000
DIN
Detailed Information

This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM F1470
1998
English

STANDARD GUIDE FOR FASTENER SAMPLING FOR SPECIFIED MECHANICAL PROPERTIES AND PERFORMANCE INSPECTION

1.1 This guide provides sampling methods for determining how many fasteners to include in a random sample in order to determine the acceptability of a given lot of fasteners. 1.2 This guide is [...]
DIN
DIN 6434
1984
English

Rivet sets

This standard specifies requirements and technical delivery conditions for rivet sets intended to be used with DIN 660, DIN 661, DIN 662 and DIN 674 rivets.
ASTM
Abstract of ASTM F812/F812M
2002
English

SURFACE DISCONTINUITIES OF NUTS

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of nuts with nominal diameters 1/4 in. [...]
DIN
DIN 835
1995
English

Studs with a length of engagement equal to about 2 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in aluminium alloys. As specified in DIN 267-2, the stud end thread shall be produced to t [...]
DIN EN
DIN EN 24766
1992
English

Slotted set screws with flat point (ISO 4766 : 1983) English version of DIN EN 24 766

This International Standard specifies the characteristics of slotted set screws with flat point and thread sizes from M 1,2 to M 12 inclusive and product grade A.
DIN
DIN 582
1971
English

Lifting Eye Nuts

Lifting eye nuts must always be tightened so that they bear solidly on the surface they contact. Loads at right angles to the plane of the eye are prohibited. When a specific position in relati [...]
ISO
ISO 2010
2011
English

Slotted raised countersunk head screws — Product grade A

This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specif [...]
DIN
DIN 938
1995
English

Studs – with a length of engagement equal to about 1 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in steel. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk [...]
ISO
ISO 898-7
1992
English

Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accord [...]