DIN 983

Retaining rings with lugs for use on shafts (external circlips)

English 1981
0.000
DIN
Detailed Information

For the purpose of this standard, retaining rings with lugs are circlips for use on shafts. They have an eccentric form and a number of lugs of equal depth uniformly distributed around the circumference. Circlips are suitable for retaining machine components which have non-square (radiused or chamfered) edges, and for concealed installation as illustrated in figure 10.

Download File
(Log in to download spec.)

Check out other specifications

SAE
SAE AS568
2001
English

Aerospace Size Standard for O-Rings

This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread [...]
DIN
DIN 705
1955
English

Bright Set Collars, Locked by Grub Screws or by Pins, Light Pattern Series

Set collars to Type A are furnished with grub screw to DIN 553.
JIS
JIS B 1055
1995
English

Tapping screws—Mechanical properties

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together [...]
NASM
NASM 3213
1998
English

SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING

(a) SCREW: CORROSION-RESISTING STEEL (CRES) IN ACCORDANCE WITH MIL-S-82496. (b) 0-RING: FLUOROSILICONE RUBBER, COMPOSITION B IN ACCORDANCE WITH MIL-S-82496 (RESISTANT TO MIL-H-5606 HYDRAULIC FL [...]
DIN
DIN 922
1986
English

Slotted pan head screws with small head and full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1.8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
ISO
ISO 888
1976
English

Bolts, screws and studs – Nominal lengths, and thread lengths for general purpose bolts

This International Standard specifies nominal lengths for bolts, screws and studs, and thread lengths for general purpose bolts.
DIN
DIN 6913
1966
English

Spring Washers with Safety Ring

The surface of the spring washer and of the safety ring must be smooth and free from scale and burr. The spring washers must be coiled with constant pitch and without any kinks (with the excep [...]
ISO
ISO 3800
1993
English

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless other [...]
EN
EN 10204
2004
English

Metallic products – Types of inspection documents

1.1 This document specified the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e. [...]