DIN 984

Spring retaining rings with lugs for use in bores (internal circlips)

English 1981
0.000
DIN
Detailed Information

For the purpose of this standard, internal circlips are spring retaining rings for fitting in bores (grooves). They have an eccentric form and have a number of lugs of equal depth uniformly distributed around the circumference. Circlips are suitable for retaining machine components which have non-square (radiused or chamfered) edges, and for concealed installation as illustrated in figure 10.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 28741
1992
English

Half-length reverse taper grooved pins (ISO 8741 : 1986) English version of DIN EN 28 741

This International Standard specifies the characteristics of half-length reverse taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surfac […]
DIN
DIN 561
1995
English

Hexagon set screws with small hexagon and full dog point

This standard specifies dimensions and technical delivery conditions for coarse and fine pitch thread M6 to M56 hexagon set screws with small hexagon and full dog point, assigned to product […]
ASTM
ASTM F1136
2004
English

Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

1.1 This specification covers the basic requirements for water-based zinc/aluminum dispersion inorganic basecoats and optional sealers and topcoats for fasteners. The basecoat can contain c […]
DIN
DIN 467
1986
English

Knurled nuts

The following amendments have been made in comparison with the November 1970 edition. a) The content of the standard has been editorially revised and aligned with the basic standards concer […]
ASTM
ASTM F837
2008
English

Standard Specification for Stainless Steel Socket Head Cap Screws

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch socket head cap screw (SHCS) with nominal thread 0.060 through 1.500 in. and intended for use […]
JIS
JIS B 0176-2
2002
English

Threading tools — Vocabulary Part 2 : Thread cutting dies

This part of JIS B 0176 specifies terms and definitions related to thread cutting dies to be used mainly for metal workings in general.
DIN
DIN 6907
1990
English

Serrated lock washers with external teeth for screw and washer assemblies

Serrated lock washers as specified in this standard are intended tor use with screw and washer assemblies as specified in DIN 6900 Part 4. Serrated lock washers are mainly designed to provi […]
ASTM
ASTM F912M
1997
English

Standard Specification for Alloy Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.
ISO
ISO 68
1973
English

ISO general purpose screw threads – Basic profile

This International Standard specifies the basic profile for ISO general purpose metric and inch screw threads.