DIN 986

Prevailing torque type hexagon domed cap nuts with nonmetallic insert

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M 4 to M 20 prevailing torque type hexagon domed cap nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for size M 20.
If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding
materials other than specified in DIN 267 Part 15, performance at temperatures exceeding + 120°C, or corrosion
resistance, this shall be agreed at the time of ordering (cf . DIN 267 Part 15) .

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1122
1996
English

Cross recessed head tapping screws

This Japanese Industrial Standard specifies the steel cross recessed head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
ISO
ISO 4753
1983
English

Fasteners – Ends of parts with external metric ISO thread

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise speci […]
DIN EN
DIN EN 20898-1
1992
English

Mechanical properties of fasteners – Bolts, screws and studs (ISO 898-1 : 1988) English version of DIN EN 20 898 Part 1

This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1) . Properties will vary at higher and lower temperature.
ISO
ISO 6506-1
2014
English

Metallic materials — Brinell hardness test — Part 1: Test method

This part of ISO 6506 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines. For some sp […]
ASME ANSI
Abstract of ASME/ANSI B1.12
1998
English

CLASS 5 INTERFERENCE-FIT THREAD

This standard provides dimensional tables for external and internal plastic flow interference-fit (Class 5) threads of modified National thread form in the coarse thread series (NC) in size […]
ISO
ISO 2009
1983
English

Slotted countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of slotted countersunk head screws in product grade A and with thread sizes M 1,6 to M 10 inclusive.
DIN
DIN 7972
1970
English

Countersunk (Flat) Head Tapping Screws with Slot

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical c […]
NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
NASM
NASM 16562
1998
English

PIN, SPRING-TUBULAR, SLOTTED

MATERIAL: STEEL, CARBON, GRADE 1070 THRU 1095 (UNS G10700 THRU G10950) IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION-RESISTANT, TYPES 410(UNS S41000) AND 420(UNS S42000) IN […]