DIN EN 12476

Phosphate conversion coatings of metals – Method of specifying requirements – English version of DIN EN 12476

English 2001

0.000

Detailed Information

This European Standard specifies a method of specifying requirements for phosphate conversion coatings, intended primarily for application to ferrous metals, aluminium, zinc, cadmium and their alloys (see annex A).

Download File

(Log in to download spec.)

Check out other specifications

ASTM

Abstract of ASTM A153/A153M

2000

English

ZINC COATING (HOT-DIP) ON IRON AND STEEL HARDWARE

1.1 This specification covers zinc coatings applied by the hot-dip process on iron and steel hardware. 1.2 This document is intended to be applicable to hardware items that are centrifuged or otherwise handled to remove excess galvanizing bath metal (free zinc). Coating thickness grade re […]

ISO

ISO 12683

2004

English

Mechanically deposited coatings of zinc — Specification and test methods

This document specifies the requirements for coatings of zinc that have been mechanically deposited on to fabricated metal articles to protect them from corrosion. It also describes the related test methods.

DIN

DIN 7500-1

2009

English

Thread rolling screws for ISO metric thread – Part 1: Technical delivery conditions for case hardened and tempered screws

This standard specifies requirements for case hardened and tempered metric thread rolling screws with various forms of head geometry designed to produce internal threads with nominal diameters from 2 mm to 12 mm, which fit general purpose ISO metric screw threads and are used in general e […]

DIN

DIN 6930-2

1989

English

Steel stampings – General tolerances

This standard is intended to simplify drawings. It specifies general tolerances on linear and angular dimensions and on coaxiality and symmetry in four accuracy grades comprising f (fine), m(medium), g (coarse) and sg (very coarse). When selecting a defined accuracy grade, the respective […]

ASME ANSI

ASME/ANSI B18.3.4M

1993

English

METRIC HEXAGON SOCKET BUTTON HEAD CAP SCREWS

1.1.1 This standard contains the complete general and dimensional requirements for metric series hexagon socket button head cap screws of nominal sizes from 3 mm to 16 mm recognized as an American National Standard. Also included are appendices covering formulas for dimensions, part numbe […]

JIS

JIS B 0209-3

2001

English

ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads

This Standard specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2 having basic profile according to JIS B 0205-1. The deviations specified are derived from the fundamental deviations and tolerances specified in JIS B 0209-1.