DIN EN 14399-6

High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06

English 2006
0.000
DIN EN
Detailed Information

This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 2901
1977
English

ISO metric trapezoidal screw threads – Basic profile and maximum material profiles

This International Standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads.
DIN
DIN 6900-4
1990
English

Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer

This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated loc [...]
JIS
JIS B 1086
1998
English

Widening test on nuts

This Standard specifies the test procedure for evaluating the acceptability of surface discontinuities designated in JIS B 1042 excluding nuts made of free cutting steel. It applies to nuts wi [...]
DIN
DIN 547
1986
English

Round nuts with drilled holes in one face

Round nuts with drilled holes in one face are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in electr [...]
DIN
DIN 50021
1988
English

Salt spray testing

This standard specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reproduced [...]
DIN
DIN 6927
1983
English

Prevailing torque type all-metal nuts with flange

This standard gives specifications for prevailing torque type all-metal nuts with flange, with metric threads with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, [...]
DIN
DIN 6903
1990
English

Plain washers for tapping screw and washer assemblies

Washers as specified in this standard are intended for use with DIN 6901 tapping screw and washer assemblies.
DIN
DIN 797
1970
English

Special Foundation Bolts

Strength category (material): 3.6 according to DIN 267 Part 3 Other strength categories or materials by agreement
ASTM
ASTM F436M
2000
English

Standard Specification for Hardened Steel Washers [Metric]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. T [...]