DIN EN 1665

Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997

German 1998
0.000
DIN EN
Detailed Information

Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.

Download File
(Log in to download spec.)

Check out other specifications

DIN ISO
DIN ISO 13715
2000
English

Technical drawings – Edges of undefined shape – Vocabulary and indications

This International Standard defines the terms defining the states of edges and specifies rules for representing states of edges of undefined shape in technical drawings. The proportions and di [...]
ASTM
Abstract of ASTM F812/F812M
2007
English

SURFACE DISCONTINUITIES OF NUTS

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of inch-series nuts with nominal diameters [...]
IFI
IFI-119
2008
English

STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the [...]
DIN
DIN 7500-1
2009
English

Thread rolling screws for ISO metric thread – Part 1: Technical delivery conditions for case hardened and tempered screws

This standard specifies requirements for case hardened and tempered metric thread rolling screws with various forms of head geometry designed to produce internal threads with nominal diameters [...]
ISO
ISO 7414
1984
English

Hexagon nuts for structural bolting with large width across flats. style 1 – Product grade B – Property class 10

This International Standard gives specifications for large series hexagon nuts, style 1, property class 10, with metric dimensions and thread sizes from M12 up to and including M36, for use wit [...]
DIN
DIN 966
1984
English

Cross recessed raised countersunk (oval) head screws

If raised countersunk oval head screws with length tabled below the stepped line are to be supplied threaded up to the head, i.e. deviating from the standard design, the letter A shall be incor [...]
DIN
DIN 562
1987
English

Square thin nuts Product grade B

This standard specifies requirements for M1,6 to M10 square thin nuts assigned to product grade B. If, in special cases, nuts are to comply with specifications other than those given in this st [...]
ISO
ISO 8992
1986
English

Fasteners — General requirements for bolts, screws, studs and nuts

This International Standard specifies the general requirements for standardized bolts, screws, studs and nuts; it complements the International Standards on dimensional and tolerance requiremen [...]
DIN
DIN 1587
1987
English

Hexagon domed cap nuts

This standard specifies requirements for M 4 to M 24 coarse and fine pitch thread hexagon domed cap nuts assigned to product grade A or B. If, in special cases, nuts are to comply with specifi [...]