DIN EN 1666

Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125: 1997, modified) English version of DIN EN 1666

English 1998
0.000
DIN EN
Detailed Information

This European Standard specifies the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d ≤ 16 mm and product grade B for d > 16 mm and with property classes 6, 8 and 10.

Download File
(Log in to download spec.)

Check out other specifications

ANSI ASME
ANSI/ASME B18.10
2000
English

TRACK BOLTS

All types of track bolts and nuts used by the various railroads and electric railways in the United States and Canada were studied by the committee, and it is their belief that the recommended [...]
DIN
DIN 7997
1984
English

Cross recessed countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the cont [...]
ASME
ASME B18.2.1
2010
English

SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)

1.1.1 This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering ga [...]
5.01
ASTM
ASTM A394
2008
English

STEEL TRANSMISSION TOWER BOLTS, ZINC-COATED AND BARE

1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts, in nominal thread diameters [...]
ASTM
ASTM F594
2009
English

STAINLESS STEEL NUTS

This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications re [...]
DIN
DIN 435
2000
English

Square taper steel washers for use with I sections

This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel I sections using bolts up to property class 5.6.
IFI
IFI-114
2008
English

BREAK MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel blind rivets suitable for use in joining the component parts of an assembly. A m [...]
DIN
DIN 267-10
1988
English

Fasteners – Technical delivery conditions – Hot-dip galvanized parts

Th s standard specifies the technical delivery conditions for fasteners (mainly screws. bolts and nuts) with an M 6 to M 36 coarse thread and provided with a zinc coating applied by hot-dip gal [...]
JIS
JIS B 0253
1985
English

Gauges for taper pipe threads

This Japanese Industrial Standard specifies the taper thread gauge for pipe hereinafter referred to as the "thread gauge", to be used for the dimensional inspection of the taper external thread [...]