DIN EN 22339

Unhardened taper pins (ISO 2339 : 1986) English version of DIN EN 22 339

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of unhardened taper pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 1483
1983
English

Slotted raised countersunk (oval) head tapping screws (common head style)

This International Standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
DIN EN 28675
1992
English

Hexagon thin nuts with metric fine pitch thread – Product grades A and B (ISO 8675 :1988) English version of DIN EN 28675

This International Standard gives specifications for hexagon thin nuts, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 64 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.
NASM
NASM 35206
2004
English

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.
ISO
ISO 2009
1983
English

Slotted countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of slotted countersunk head screws in product grade A and with thread sizes M 1,6 to M 10 inclusive.
DIN
DIN 553
1972
English

Slotted Set Screws with Cone End

In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M 1.8 and M 2.5 have been included. The sizes M 1.7, M 2.3 and M 2.6 have been barred for new designs.
ISO
ISO 7047
1983
English

Cross recessed raised countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of cross recessed raised countersunk head screws with thread sizes from M 1,6 to M 10 inclusive. If other specifications are required, it is recommended that they should be selected from existing International Standards, for examp […]