DIN EN 22340
Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1994
English
Mechanical properties of fasteners – Nuts with coarse pitch thread and specified proof load values (ISO 898-2 : 1992) English version of DIN EN 20898 Part 2
This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lowe […]
1998
English
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
1.1 This specification covers the requirements for quenched and tempered alloy steel socket-head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
2001
English
ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads
This Standard specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2 having basic profile according to JIS B 0205-1. […]
1997
English
Hexagon bolts with flange — Heavy series
This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
1993
English
HIGH-STRENGTH STEEL BOLTS, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS [METRIC]
1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inclusive. These bolts are intended for […]