DIN EN 24014

Hexagon head bolts – Product grades A and B (ISO 4014 : 1988) English version of DIN EN 24014

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is shorter and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is shorter.

If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506 and ISO 4759-1.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1479
1975
English

Turnbuckle Nuts Made from Hexagon Bar

Material: Steel of at least 350 N/mm2 (≈34 kp/mm2) tensile strength Steel of higher strengths or specified materials by agreement
DIN
DIN 522
1990
English

Metal washers – Technical delivery conditions

This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It d […]
DIN
DIN 315
1983
English

Wing nuts

The following amendments have been made in comparison with the December 1972 edition: a) The dimensions of the wing nuts have been altered in some respects. b) Limiting sizes have been adop […]
ASTM
Abstract of ASTM F1137
1993
English

PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of corrosion protective coatings for fasteners. Grade I consists of a zinc phosphate coating with a supplemental protec […]
DIN
DIN 7993
1970
English

Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores

The standard DIN 9045 contains snap rings capable of use in like manner for external and internal retaining duty. This necessarily entails a gap between the two ends of the wire to permit i […]
DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical c […]
ISO
ISO 15071
1999
English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes […]
DIN EN
DIN EN 28746
1992
English

Grooved pins with round head (ISO 8746 : 1986) English version of DIN EN 28 746

This International Standard specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric […]
DIN
DIN 7991
1986
English

Hexagon socket countersunk head cap screws

This standard specifies product grade A hexagon socket countersunk head cap screws with ISO metric screw thread from size M 3 up to and including size M 24. If, in special cases, the screw […]