DIN EN 24015

Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) Product grade B (ISO 4015: 1979) English version of DIN EN 24 015

English 1991
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon head bolts with metric dimensions and thread diameters from 3 up to and including 20 mm, with reduced shank (shank diameter ≈ pitch diameter), of product grade B.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 267-12
1971
English

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons [...]
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
ISO
ISO 13918
2008
English

Welding — Studs and ceramic ferrules for arc stud welding

This International Standard specifies: ⎯ requirements for studs and ceramic ferrules for arc stud welding; ⎯ dimensions, materials, mechanical properties and, when required, conditions of evalu [...]
DIN
DIN 608
1981
English

Flat countersunk square neck bolts with short square

This standard specifies flat countersunk square neck bolt with short square, with metric threads M 10 and M 12, of product grade C.
ASTM
Abstract of ASTM A325
2002
English

STRUCTURAL BOLTS, STEEL, HEAT TREATED, 120/105 KSI MINIMUM TENSILE STRENGTH

1.1 This specification covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less, and 105 ksi for sizes [...]
JIS
JIS B 1085
1995
English

Cone proof load test on nuts

This Standard specifies the properties of nuts with — nominal thread diameter, d, from 5 mm up to and including 39 mm, — product grades A and B, — property classes 8 to 12, under the condition [...]
ANSI
ANSI B18.22M
1990
English

METRIC PLAIN WASHERS

This standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications. The inclusion [...]
DIN
DIN 1143-1
1982
English

Round plain head nails for use in automatic nailing machines

This standard specifies requirements for round plain head nails for use in automatic nailing machines.
ISO
ISO 3508
1976
English

Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262

This International Standard specifies thread run-outs for fasteners with thread in accordance with ISO 261, ISO general purpose metric screw threads - General plan, and with ISO 262, ISO genera [...]