DIN EN 24016

Hexagon head bolts – Product grade C (ISO 4016 :1988) English version of DIN EN 24 016

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon head bolts with threads from M5 up to and including M64 of product grade C.

If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898 1, ISO 965-2 and ISO 4759-1.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 522
1990
English

Metal washers – Technical delivery conditions

This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It d […]
DIN EN
DIN EN 1665
1998
English

Hexagon bolts with flange – Heavy series – English version of DIN EN 1665

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
NASM
NASM 35649
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 […]
DIN
DIN 2093
1992
English

Dimensions and quality of conical disc springs

This standard specifies requirements for the materials, dimensions, tolerances, and permissible stresses for conical disc springs. It includes graphs showing the permissible relaxation and […]
BS EN
BS EN 10025-3
2004
English

Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled del […]
DIN
DIN 467
1986
English

Knurled nuts

The following amendments have been made in comparison with the November 1970 edition. a) The content of the standard has been editorially revised and aligned with the basic standards concer […]
BS EN
BS EN 10025-1
2004
English

Hot rolled products of structural steels — Part 1: General technical delivery conditions

1.1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document sp […]
ASTM
ASTM A368
2009
English

Standard Specification for Stainless Steel Wire Strand

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes. 1.2 The v […]
ISO
ISO 3269
2000
English

Fasteners — Acceptance inspection

1.1 This International Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted o […]